FM COOLANT

Propylene glycol-based fluid containing anti-corrosion additives, for use in closed systems to chill/cool/heat food or beverages in food industry applications. Designed to be used in mixtures with potable water. Suitable for operating in the range -45 °C to 120 °C.

Main application: Secondary cooling, or heating, in the food and beverage industry. For use in closed cooling systems, including those where there is a potential for incidental food contact. Not to be used for applications where there is direct contact between food and the coolant.

	Typical Viscosity at 20 °C [mm²/s]	Typical Viscosity at 40 °C [mm²/s]
FM COOLANT	47	17

FM HEAT TRANSFER FLUID 32

High performance heat transfer fluid. Can handle a wide range of application temperatures and has excellent thermal and oxidative stability to minimise cracking and promote long service life.

Main application: For closed circuit and pressureless heat transfer systems with a bulk oil temperature range of approximately -10 °C to max. +325 °C where the surface temperature of the heating elements (oil film temperature) should not exceed +340 °C.

	Typical Viscosity at 40 °C [mm²/s]	Typical Viscosity at 100 °C [mm²/s]
FM HEAT TRANSFER FLUID 32	35	6

FM HYDRAULIC OIL 32 · 46 · 68 · 100

Hydraulic fluids for food & beverage processing equipment.

Main application: Hydraulic systems, hydrostatic gears and control systems, plain and anti-friction bearings on food handling and processing equipment.

	Typical Viscosity at 40 °C [mm²/s]	Typical Viscosity at 100 °C [mm²/s]
FM HYDRAULIC OIL 32	32	5,7
FM HYDRAULIC OIL 46	46	7
FM HYDRAULIC OIL 68	68	9
FM HYDRAULIC OIL 100	100	11,5

FM GEAR OIL TLS 150

Speciality anti-wear gear lubricant which is specifically designed for use in the food and beverage canning industry. Provides good lubrication even when operating in locations where it is subject to contamination with water, juice and food, which is held in suspension, thus protecting metal surfaces from wear and corrosion. Only to be used for total loss systems.

Main application: Suitable for can seamer gearboxes on food handling and processing equipment. May also be used for general machine lubrication.

	Typical Viscosity at 40 °C [mm²/s]	Typical Viscosity at 100 °C [mm²/s]
FM GEAR OIL TLS 150	150	15

FM FLUID RC 150 · 220

Specialty high performance fluid specially developed for use in rotary cooking equipment in food and beverage canning plants. Provides good lubrication even when operating in locations where it is subject to contamination with water.

Main application: For use in the centralised systems of rotary cookers and sterilisers which lubricate the can exchange valves and other moving components.

	Typical Viscosity at 40 °C [mm²/s]	Typical Viscosity at 100 °C [mm²/s]
FM FLUID RC 150	150	15.5
FM FLUID RC 220	220	20.4

FM GEAR OIL 220 · 460

Gear lubricants for food & beverage processing equipment.

Main application: Suitable for gearboxes on food handling and processing equipment. May also be used for general machine lubrication or as flushing fluid.

	Typical Viscosity at 40 °C [mm²/s]	Typical Viscosity at 100 °C [mm²/s]
FM GEAR OIL 220	220	20
FM GEAR OIL 460	460	30

FM SUGAR DISSOLVING FLUID

Emulsifiable oil-based cleaning and rust protecting concentrate. Designed to be used in mixtures with potable water on machine surfaces in the food and sugar manufacturing industry.

Main application: For cleaning and flushing sugar or sugarbased deposits from food and beverage manufacturing equipment. For freeing moving parts or screws and bolts that are stuck with sugar deposits. For lubrication of lightly loaded bearings and slideways especially where sugar deposits are likely to form. For cleaning sugar deposits off meshes and screens.

	Viskosität bei 40 °C [mm²/s]	Viskosität bei 100 °C [mm²/s]
FM SUGAR DISSOLVING FLUID	34	6

FM FLUID DC 20 · 68

White mineral oil multi-purpose low volatility fluids suitable for both direct and incidental food contact applications. Can handle a wide range of applications.

Main application: Absorber oils for edible oil extraction plant solvent recovery systems. Release agent used on grills, loaf pans, cutters, boning benches, chopping blocks or other hard surfaces to help prevent food from adhering during processing. Forming oils for the manufacture of both two and three piece cans for food and beverages.

	Typical Viscosity at 40 °C [mm²/s]	Typical Viscosity at 100 °C [mm²/s]
FM FLUID DC 20	22	4
FM FLUID DC 68	68	9,5

FM GREASE DC 2 · DC SPRAY

White mineral oil grease, multi-purpose, suitable for both direct and incidental food contact applications. Can handle a wide range of applications.

Main application: For use as a direct food contact release agent for grills, loaf pans, cutters, boning benches, chopping blocks and other hard surfaces to help prevent food from adhering during processing. Lubrication and protection of seals, guides, bearings and blades operating in food, pharmaceutical and other clean environments where direct food contact is inevitable.
*without propellant

	Typical Viscosity at 40 °C [mm²/s]	Typical Viscosity at 100 °C [mm²/s]	NLGI-Grades
FM GREASE DC 2	100	11	2
FM GREASE DC Spray	100	11	00*

FM GREASE HD 1.5 · 2

Modified aluminium complex heavy duty / extreme pressure greases.

Main application: For use on slow to medium speed plain and rolling element bearings in heavy-loaded and shock-loaded applications. Recommended for use in machinery where frequent changes of the grease charge are required or there is a high product consumption rate, such as machines used to process pet food and animal feed.