CASSIDA GREASE RLS 000 · 00 · 0 · 1 · 2
High performance regular load synthetic base fluid aluminium complex greases.
Main application: For use on bearings, bushings and linkages on food manufacturing equipment. CASSIDA GREASE RLS 0 and 00 are particulary recommended for centralised lube systems or other similiar systems where an NLGI 2 grease may be difficult to dispense.
Main application: For use on bearings, bushings and linkages on food manufacturing equipment. CASSIDA GREASE RLS 0 and 00 are particulary recommended for centralised lube systems or other similiar systems where an NLGI 2 grease may be difficult to dispense.
Typical Base
Oil Viscosity at 40 °C [mm²/s] |
Typical Base
Oil Viscosity at 100 °C [mm²/s] |
NLGI-Grade
| |
|---|---|---|---|
CASSIDA GREASE RLS 000
|
100
|
13
|
<000
|
CASSIDA GREASE RLS 00
|
100
|
13
|
00
|
CASSIDA GREASE RLS 0
|
150
|
18
|
0
|
CASSIDA GREASE RLS 1
|
150
|
18
|
1
|
CASSIDA GREASE RLS 2
|
150
|
18
|
2
|
CASSIDA GREASE EPS 00 · 1 · 2
High performance extreme pressure aluminium complex greases with synthetic base fluid.
Main application: For use on bearings, bushings and linkages on food manufacturing equipment, particulary where there are high pressure and loads, high temperatures and water spray. CASSIDA GREASE EPS 00 is especially recommended for centralised lube sytems and enclosed gears.
Main application: For use on bearings, bushings and linkages on food manufacturing equipment, particulary where there are high pressure and loads, high temperatures and water spray. CASSIDA GREASE EPS 00 is especially recommended for centralised lube sytems and enclosed gears.
Typical Base
Oil Viscosity at 40 °C [mm²/s] |
Typical Base
Oil Viscosity at 100 °C [mm²/s] |
NLGI-Grade
| |
|---|---|---|---|
CASSIDA GREASE EPS 00
|
220
|
25
|
00
|
CASSIDA GREASE EPS 1
|
220
|
25
|
1
|
CASSIDA GREASE EPS 2
|
220
|
25
|
2
|
CASSIDA GREASE HDS 00 · 2
High performance high viscosity synthetic base fluid heavy duty aluminium complex greases.
Main application: For use on bearings, bushings and linkages on food manufacturing equipment, particulary where slower speeds, high pressure and loads, high temperatures and water spray are present. CASSIDA GREASE HDS 00 is recommended for open gears and centralised lube systems.
Main application: For use on bearings, bushings and linkages on food manufacturing equipment, particulary where slower speeds, high pressure and loads, high temperatures and water spray are present. CASSIDA GREASE HDS 00 is recommended for open gears and centralised lube systems.
Typical Base
Oil Viscosity at 40 °C [mm²/s] |
Typical Base
Oil Viscosity at 100 °C [mm²/s] |
NLGI-Grade
| |
|---|---|---|---|
CASSIDA GREASE HDS 00
|
800
|
68
|
00
|
CASSIDA GREASE HDS 2
|
800
|
68
|
2
|
CASSIDA GREASE GTS 2 · GTS SPRAY
Specialty extreme pressure calcium sulphonate complex greases with synthetic base fluid. Excellent extreme pressure, anti-wear and corrosion prevention properties.
Main application: For use on bearings of electric motors, pumps, conveyors, mixers, gear units and bearings.
*without propellant
Main application: For use on bearings of electric motors, pumps, conveyors, mixers, gear units and bearings.
*without propellant
Typical Base
Oil Viscosity at 40 °C [mm²/s] |
Typical Base
Oil Viscosity at 100 °C [mm²/s] |
NLGI-Grade
| |
|---|---|---|---|
CASSIDA GREASE GTS 2
|
85
|
12,8
|
2
|
CASSIDA GREASE GTS Spray
|
85*
|
12,8*
|
2*
|
CASSIDA GREASE GTX 0 · 2
High performance extreme pressure calcium sulphonate complex grease with synthetic base fluid. Excellent extreme pressure, anti-wear and corrosion prevention properties.
Main application: For use on bearings of electric motors, pumps, conveyors, mixers, gear units and bearings. Heavy-loaded and shock-loaded applications with low to medium speed bearings operating up to 180 °C, such as machines used to process pet food and animal feed.
Main application: For use on bearings of electric motors, pumps, conveyors, mixers, gear units and bearings. Heavy-loaded and shock-loaded applications with low to medium speed bearings operating up to 180 °C, such as machines used to process pet food and animal feed.
Typical Base
Oil Viscosity at 40 °C [mm²/s] |
Typical Base
Oil Viscosity at 100 °C [mm²/s] |
NLGI-Grade
| |
|---|---|---|---|
CASSIDA GREASE GTX 0
|
460
|
44
|
0
|
CASSIDA GREASE GTX 2
|
460
|
44
|
2
|
CASSIDA GREASE HTS 2
Inorganically thickened grease with synthetic base fluid.
Main application: Suitable for applications on food manufacturing equipment where high temperatures (peak 220 °C) can be experienced.
Main application: Suitable for applications on food manufacturing equipment where high temperatures (peak 220 °C) can be experienced.
Typical Base
Oil Viscosity at 40 °C [mm²/s] |
Typical Base
Oil Viscosity at 100 °C [mm²/s] |
NLGI-Grade
| |
|---|---|---|---|
CASSIDA GREASE HTS 2
|
400
|
40
|
2
|
CASSIDA GREASE LTS 1
High performance aluminium complex grease with low viscosity synthetic base fluid.
Main application: For use on bearings, bushing and linkages on food manufacturing equipment. Particulary recommended for use in cold storage situations with temperatures down to -50 °C.
Main application: For use on bearings, bushing and linkages on food manufacturing equipment. Particulary recommended for use in cold storage situations with temperatures down to -50 °C.
Typical Base
Oil Viscosity at 40 °C [mm²/s] |
Typical Base
Oil Viscosity at 100 °C [mm²/s] |
NLGI-Grade
| |
|---|---|---|---|
CASSIDA GREASE LTS 1
|
20
|
4,5
|
1
|
CASSIDA GREASE P 1
Specialty high-performance grease. Inorganically thickened withfully synthetic base fluids.
Main application: Lubrication of heavily loaded plain or rollerbearings, joints, linkages, and slides up to 150 °C (peak 180°C) andprotection of seals and guides
Main application: Lubrication of heavily loaded plain or rollerbearings, joints, linkages, and slides up to 150 °C (peak 180°C) andprotection of seals and guides
Typical Viscosity at
40 °C [mm²/s] |
Typical Viscosity at
100 °C [mm²/s] |
NLGI-Grade
| |
|---|---|---|---|
CASSIDA GREASE P 1
|
770
|
65
|
1
|
CASSIDA GREASE MD 2
High performance silicone based speciality grease specially developed for the lubrication and sealing of taps, valves and fittings with EPDM seals. Suitable for use with other seal materials normally used in food machinery lubrication systems. Good resistance to hot water, steam and disinfectant solutions.
Main application: Taps, flow meters and fittings used for the handling of water, drinks and beer. Seals on autoclaves and sterilisers. Suitable for continuous operation at temperatures up to 180 °C and short term exposure to temperatures not exceeding 250 °C.
Main application: Taps, flow meters and fittings used for the handling of water, drinks and beer. Seals on autoclaves and sterilisers. Suitable for continuous operation at temperatures up to 180 °C and short term exposure to temperatures not exceeding 250 °C.
Typical Base
Oil Viscosity at 40 °C [mm²/s] |
Typical Base
Oil Viscosity at 100 °C [mm²/s] |
NLGI-Grade
| |
|---|---|---|---|
CASSIDA GREASE MD 2
|
650
|
250
|
2-3
|
CASSIDA GREASE FC 1 · 2
High performance high temperature grease especially developed for the lubrication of bearings and seals working at extreme operating temperatures, aggressive environments and for filled for life conditions in food and beverage processing machinery. Effective anti-corrosion prevention characteristics. Excellent elastomer compatibility. Suitable for applications where components might be exposed to reactive chemicals and gases; chemically inert or non-reactive in contact with strong acids, alkalis and halogens. Excellent elastomer compatibility.
Main application: Plain/roller bearing elements, joints, linkages and mechanical seals which are exposed to solvents, chemically aggressive materials and radiation. Suitable for continuous operation at temperatures up to 260 °C and short term exposure to temperatures not exceeding 300 °C.
Main application: Plain/roller bearing elements, joints, linkages and mechanical seals which are exposed to solvents, chemically aggressive materials and radiation. Suitable for continuous operation at temperatures up to 260 °C and short term exposure to temperatures not exceeding 300 °C.
Typical Base
Oil Viscosity at 40 °C [mm²/s] |
Typical Base
Oil Viscosity at 100 °C [mm²/s] |
NLGI-Grade
| |
|---|---|---|---|
CASSIDA GREASE FC 1
|
510
|
47
|
1
|
CASSIDA GREASE FC 2
|
510
|
47
|
2
|
CASSIDA PASTE AP
Synthetic assembly paste for food & beverage processing equipment.
Main application: Assembly paste with an extremely large range of applications, e.g. screw paste for highalloy steels to optimize the tightening torque, mounting and pressing of bearings and disks, wheels and bolts, lubrication of adjusting mechanisms as well as for drifting, bending, punching, pressing and stamping.
Main application: Assembly paste with an extremely large range of applications, e.g. screw paste for highalloy steels to optimize the tightening torque, mounting and pressing of bearings and disks, wheels and bolts, lubrication of adjusting mechanisms as well as for drifting, bending, punching, pressing and stamping.
Typical Base
Oil Viscosity at 40 °C [mm²/s] |
Typical Base
Oil Viscosity at 100 °C [mm²/s] |
NLGI-Grade
| |
|---|---|---|---|
CASSIDA PASTE AP
|
85
|
12
|
1
|
